 |
 |
 |
 |
 |
 |
 |
Lateral stability and spacing of towers is accomplished with horizontal braces and "X" brace panels. |  |
|
Bracing is attached with 3/4" diameter Grade 8 bolts to clips that are factory installed on 60" vertical centers. | |
|
All bracing is hot rolled angle. | |
|
See bracing patterns below for varying tower heights. | |
|
All starting and ending bays must have "X" brace panel(s). Then every other bay, the "X" brace panel may be replaced with horizontal braces. | |
 |
