 |
 |
 |
 |
 |
 |
| 1/2" Diameter Grade 5 Bolt and Serrated Flange Nut |  |
|||
 |
Used for shelf beam and shelf beam accessory connections. | |||
|
Bolts are provided in 1 1/4" or 4" lengths. The 1 1/4" bolt is the most commonly used. The 4" length is only used to bolt shelf beams to frame posts that are reinforced. | |||
|
Are automatically included in the quote for any shelf beams or bolt on accessories. | |||
 |
||||
| Beam Ties | ||||
|
Are hot rolled angles (1 1/2 X 1 1/2 X .115) with angle clips. | |||
|
Laterally brace shelf beams. | |||
|
Are NOT designed to be loaded and are recessed down into shelf beams. |
Beam Tie Part Number: BT-48 where"48" = Frame Depth in inches |
||
 |
||||
| Pallet Supports | ||||
|
Are hot rolled angles or channels (see sizes below). | |||
|
Aid in preventing undersized or misplaced pallets from falling off shelf beams. | |||
|
Laterally brace shelf beams. |
Pallet Support Part Number: PS-2x2x3/16 - 48 where size = 2x2x3/16 & Frame Depth in inches = 48 |
||
|
Are designed to be loaded and are flush to the top of the shelf. | |||
| Frame Depth | <2X2X1/8 | <2X2X5/32 | <2X2X3/16 | <2-1/2X2-1/2X3/16 | C3X3.5 |
| 36" | 1700 | 2000 | 2400 | 3400 | 5900 |
| 40" | 1500 | 1800 | 2100 | 3100 | 5200 |
| 44" | 1300 | 1600 | 1900 | 2800 | 4500 |
| 48" | 1150 | 1450 | 1650 | 2400 | 4000 |
| 52" | 1000 | 1200 | 1500 | 2200 | 3600 |
-Loads are uniformly distributed across the pallet frame depth.
 |
Note:
|
Beam Ties and Pallet Supports require 2-1/2" Grade 5 bolts. Holes are pre-drilled into shelf beam webs to accept the angle clips. |
| Forklift Clearance Channel (Drop In) | |||||
|
Keeps the pallet elevated over the shelf beams for easy forklift loading and unloading. Match the size of the channel to fit the load requirements and fork clearance. | ||||
| Capacities for each channel - Units = Lbs | |||||
| Frame Depth | C3X3.5 | C4X4.5 |  |
||
| 36 | 6300 | 10300 | |||
| 40 | 5400 | 8400 | |||
| 44 | 4800 | 7800 | |||
| 48 | 4200 | 6900 | |||
| 52 | 3800 | 6100 | |||
| Barrel Bed (Drop In) | ||||
|
Properly Secures barrels and coils from rolling. | |||
|
Contact HR Sales for other available angles (including uneven leg angles) | |||
| Frame Depth | 3X3X3/16 | 3½X3½X5/16 |  |
|
| 36 | 4400 | 7700 | ||
| 40 | 4000 | 7400 | ||
| 42 | 3600 | 7100 | ||
| 48 | 3300 | 6800 | ||
| 52 | 3000 | 6500 | ||
| Skid Channel (Drop In) | |||
|
Properly positions the supports of a pallet or container within the channel. Match the size of the channel to fit the load requirements and fork clearance. | ||
|
Ideal for material bins. | ||
| Frame Depth | C3X3.5 | C4X4.5 |  |
|
| 36 | 1500 | 2100 | ||
| 40 | 1300 | 1800 | ||
| 44 | 1100 | 1500 | ||
| 48 | 900 | 1200 | ||
| 52 | 700 | 900 | ||
Note: Each forklift clearance channel and skid channel requires 2 -1/2" Grade 5 bolts. Each barrel bed requires 4 -1/2 Grade 5 bolts. All load capacities are uniformly distributed. Holes are pre-drilled into shelf beam webs to accept the angle clips. When determining the frame heights be sure to include the height of the drop in accessories. See additional pallet rack notes for channel dimensions.
